|
|
|
| Lithium-Polymer
batteries represent the latest stage in the evolution of cell
technology. These batteries boast the highest specific energy of
all rechargeable cell systems developed to date. An additional
advantage is their low self-discharge rate, which means that they
can be stored for long periods without requiring recharging. In
contrast to NiCd and NiMH batteries the system voltage of a single
Li-Poly energy storage unit is typically 3.7 V instead of 1.2 V,
which reflects the special construction of the cell. In terms of
voltage a single Lithium-Polymer cell is the equivalent of three
NiCd or NiMH cells. • 2 - 3 times higher energy density than conventional NiCd / NiMH batteries • High discharge rates • Ultra-light battery packs available for indoor and slow-fly models. |
|
| Important:
These batteries must only be recharged using chargers designed
specifically for them. It is also essential that Li-Po cells are not discharged below 2.7 V / cell. The high energy density of these cells has a drawback: if they are incorrectly handled or damaged, there is a risk of overheating and combustion. Always charge these batteries on a non-flammable surface, and well away from inflammable materials. Be sure to read and observe the safety notes! |
|
|
|
|
|
Cod. |
Tipe / Volt / Amper |
Price in Euro |
Charatheristics |
|
| #001 | Li-Batt 1-145P 3,7V/145 mAh | 7,90 | ||
| #002 | Li-Batt 2/1-145P-J 7,4V/145 mAh | 15.90 | ||
| #003 | Li-Batt 1-350P 3,7V/350 mAh | 10.90 | ||
| #004 | Li-Batt 2/1-350P-J 7,4V/350mAh | 21.90 | ||
| #005 | Li-Batt 3/1-350P | 32.50 | ||
| #006 | Li-Batt 3/2-700P | 64.00 | ||
| #007 | Li-Batt 1-750P 3,7V/750mAh | 11.40 | ||
| #008 | Li-Batt 2/1-750P-M6 7,4V/750mAh | 22.50 | ||
| #009 | Li-Batt 3/1-750P-M6 11.1V/750mAh | 33.50 | ||
| #010 | Li-Batt 1-1500P 3,4V/1500mAh | 15.90 | ||
| #011 | Li-Batt 2/1-1500P-M6 7,4V/1500mAh | 31.90 | ||
| #012 | Li-Batt 3/1-1500P-M6 11,1V/1500mAh | 46.90 | ||
| #016 | Li-Batt 2/1-2000P 7,4V/2000mAh | 57.90 | ||
| #017 | Li-Batt 3/1-2000P 7,4V/2000mAh | 85.90 | ||
| #021 | Li-Batt 2/1-1250P-MPX | 41.90 | Tensione
nominale: 7,4 V / 2 elementi Tipo elementi: 1250mAh LiPo Dimensioni: ca. 17x43x78 mm |
Peso:
ca. 85 g Corrente carica veloce(1C): max. 1250 mA Corrente di scarica: max. 18 A |
| #023 | Li-Batt 3/1-1250P-M6 | 61.90 | Tensione
nominale: 11,1 V / 3 elementi Tipo elementi: 1250mAh LiPo Dimensioni: ca. 17x43x80 mm |
Peso:
ca. 120 g Corrente carica veloce(1C): max. 1250 mA Corrente di scarica: max. 18 A |
| #030 | Li-Batt 1-910P- 3,7V/910mAh blank | 20.90 | Tensione
nominale: 3,7 V / 1 elemento Tipo elemento: 910mAh LiPo Dimensioni: ca. 6x33x61 mm |
Peso:
ca. 23 g Corrente carica veloce(1C): max. 910 mA Corrente di scarica: max. 13 A |
| #031 | Li-Batt 2/1-910P | 39.90 | Tensione
nominale: 7,4 V / 2 elementi Tipo elementi: 910mAh LiPo Dimensioni: ca. 12x33x63mm |
Peso:
ca. 47 g Corrente carica veloce(1C): max. 910 mA Corrente di scarica: max. 13 A |
| #032 | Li-Batt 3/1-910P | 58.90 | Tensione
nominale: 11,1 V / 3 elementi Tipo elementi: 910mAh LiPo Dimensioni: ca. 18x34x62mm |
Peso:
ca. 70 g Corrente carica veloce(1C): max. 910 mA Corrente di scarica: max. 13 A |
| #033 | Li-Batt 1-3200P | 61.90 | Tensione
nominale: 3,7 V / 1 elemento Tipo elemento: 3200mAh LiPo Dimensioni: ca. 8x43x128 mm |
Peso:
ca. 87 g Corrente carica veloce(1C): max. 3200 mA Corrente di scarica: max. 64 A |
| #034 | Li-Batt 2/1-3200P | 89.90 | Tensione
nominale: 7,4 V / 2 elementi Tipo elementi: 3200mAh LiPo Dimensioni: ca. 16x42x131 mm |
Peso:
ca. 174 g Corrente carica veloce(1C): max. 3200 mA Corrente di scarica: max. 64 A |
| #035 | Li-Batt 3/1-3200P | 178.90 | Tensione
nominale: 11,1 V / 3 elementi Tipo elementi: 3200mAh LiPo Dimensioni: ca. 24x43x131 mm |
Peso:
ca. 260 g Corrente carica veloce(1C): max. 3200 mA Corrente di scarica: max. 64 A |
| #036 | Li-Batt 1-640P | 11.90 | Tensione
nominale: 3,7 V / 1 elemento Tipo elemento: 640mAh LiPo Dimensioni: ca. 4,5x34x61 mm |
Peso:
ca. 15 g Corrente carica veloce(1C): max. 640 mA Corrente di scarica: max. 9 A |
| #037 | Li-Batt 2/1-640P | 27.90 | Tensione
nominale: 7,4 V / 2 elementi Tipo elementi: 640mAh LiPo Dimensioni: ca. 9x34x63 mm |
Peso:
ca. 35 g Corrente carica veloce(1C): max. 640 mA Corrente di scarica: max. 9 A |
| #038 | Li-Batt 3/1-640P | 41.90 | Tensione
nominale: 11,1 V / 3 elementi Tipo elementi: 640mAh LiPo Dimensioni: ca. 14x34x63 mm |
Peso:
ca. 60 g Corrente carica veloce(1C): max. 640 mA Corrente di scarica: max. 9 A |
Copyright © 2004 Zeppelin-Dirigibili